| Production
Speed: |
 1-30
loads per hour (Single Turntable)
NOTE: Process rates will vary with load size,
number of wraps & forklift load/unload
time |
 |
| Load Capacity: |
Maximum
load weight: 5,000# dynamic – 10,000#
static
Maximum load size: 56” W x 56” L
x (79” max. load
diagonal) x 80” H (plus up to 4” top
overlap) |
|
| Turntable: |
48” octagonal
5/16” thick formed steel plate turntable
4 point caster support system
Turntable height less than 11” from
floor
ANSI # 50 direct chain drive c/w chain
tensioner
3-12 RPM rotational speed c/w soft
start acceleration
1/2 HP DC variable speed motor
Final revolution deceleration and
positive stop alignment
Front and back forklift ports for
easy movement
Accu-Count exact turntable positioning
system for
additional
film savings! |
|
| Film Carriage Elevator: |
1/2
HP DC variable speed motor
ANSI
#40 direct chain drive c/w shock
dampener
Maintenance free 12 point carriage
guidance system |
|
| Film Delivery System: |
Electro-Magnetic
Web Tensioning System
Standard 20” roll width, 10” diameter
Carriage
Descent Obstruction Safety Shut-Off Device
Side mounted film carriage for operator
convenience and
safety |
|
| Film Capacity: |
Accepts
all commercial films wound on 3” diameter
cores
x 20” width
Accommodates damaged cores |
|
| Control Features: |
Simple
to operate
PANASONIC PLC
Power Off – On – Reset
switch & Power
On indicator
light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Base or Top Wraps First program
Reinforce Wrap control for mid-wrapping
Up Only or Up/Down wrap program
Emergency Stop button
Turntable Jog switch
Film Carriage Lower/Raise switch
Film tension (Force-to-Load) control
Separate film carriage raise & lower
speed controls
Variable turntable speed control
Triple beam type auto load height
sensing photo-eye,
detects
dark or shiny loads
Separate 1 to 9 revolution top & bottom
wrap control
NEMA 12 control panel enclosure
Non-proprietary UL/CSA approved components |
|
| Structural Features: |
All
structural steel construction
Forklift truck portable base structure
design – lifting
tubes
included for front and rear access
Structural
steel H-beam machine tower
Electro-static powder coated paint
finish |
|
Electrical Requirement:
|
115
Volts 1 Phase 60 Hz 15 Amps |
