| Production
Speed: |
 1-40
loads per hour
NOTE: Process rates will vary with
load size, number of
wraps & forklift load/unload
time |
 |
| Load Capacity: |
Maximum
load weight: 5,000# dynamic – 10,000#
static
Maximum load size: 50” W x 50” L
(71” max. load
diagonal) x 87” H (plus up to 4” top
overlap) |
|
| Turntables: |
57” diameter
laser-cut steel plate with surround deck
protection - 3/8” thick (qty. 2 for
dual turntable)
Maintenance free - 36 roller bearing support
system
Turntable height 2.938” from floor
ANSI # 50 direct chain drive c/w chain tensioner
3-12 RPM rotational speed c/w soft start
acceleration
1/2 HP DC variable speed motor (qty. 2 for
dual turntable)
Final revolution deceleration and positive
stop alignment
Rugged surround deck for added protection,
3 sided
loading
and pit mounting
Front and back forklift ports for easy movement
Accu-Count exact turntable positioning system
for
additional
film savings!
Optional loading ramps 60” long x 48” wide
complete with
10” level porch area available |
|
| Film Carriage Elevator: |
1/2
HP DC variable speed motor
ANSI
#40 direct chain drive c/w shock
dampeners &
Anti-Fall
Safety Device
Maintenance free 12 point carriage
guidance system |
|
| Film Delivery System: |
Super
Rapid Thread™ 20” capacity pre-stretch
carriage
with Patent Pending pressure balanced nip
roller system
1/2 HP DC variable speed motor
Fully electronic dynamic dancer corner compensation
33 to 313% fixed stretch capability
Pre-stretch ratio variable by easy sprocket
change
Rapid Thread™ Safety Door
with auto power cut-off
switch
Carriage Descent Obstruction Safety Shut-Off
Device
Side mounted film carriage for operator convenience
and
safety |
|
| Control Features: |
Simple
to operate
PANASONIC PLC
Power Off – On – Reset switch & Power
On indicator
light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Base or Top Wraps First program
Reinforce Wrap control for mid-wrapping
Up Only or Up/Down wrap program
Emergency Stop button
Turntable Jog switch
Turntable Left/Right switch (for dual
turntable systems
only)
Film Carriage Lower/Raise switch
Film tension (Force-to-Load) control
Separate film carriage raise & lower
speed controls
Variable turntable speed control
Triple beam type auto load height
sensing photo-eye,
detects
dark or shiny loads (2 photo-eyes provided
with
dual
turntable system)
Separate 1 to 9 revolution top & bottom
wrap control
NEMA 12 control panel enclosure
Non-proprietary UL/CSA approved components |
|
| Structural Features: |
All
structural steel construction
Forklift truck portable base structure
design – lifting
tubes
included for front and rear access
Fully guarded structural steel H-beam
machine tower
Electro-static powder coated paint
finish |
|
Electrical Requirement:
|
115
Volts 1 Phase 60 Hz 15 Amps |
