| Production
Speed: |
 1-40
loads per hour
NOTE: Process rates will vary with load size,
number of wraps & forklift load/unload
time |
 |
| Load Capacity: |
Maximum
load weight: Unlimited (Floor Supported)
Maximum load size: 56” W x 56” L
x 80” H (79” Max. load
Diagonal) |
|
| Rotary Arm: |
20” Diameter
Ring Bearing Support
ANSI # 60 Direct Chain Drive c/w Chain
Tensioner
3-15 RPM rotational speed c/w soft
start acceleration
Final Revolution Deceleration and
positive stop alignment
3/4 HP DC Rotary Arm Drive Motor |
|
| Film Carriage Elevator: |
1/2
HP DC variable speed motor
ANSI # 40 direct chain drive c/w shock
dampener
Maintenance free 12 point carriage
guidance system |
|
| Film Delivery System: |
Rapid
Thread™ 20” capacity pre-stretch
film carriage
1/2 HP DC variable speed motor
Fully electronic dynamic dancer corner
compensation
Pre-stretch ratio variable by easy
sprocket change
33 to 313% fixed stretch capability
(shipped fixed at
207%)
Rapid
Thread™ (Safety
Door) with auto power cut-off
switch |
|
| Control Features: |
Simple
to operate
PANASONIC PLC with Touchscreen Operator Interface
Power Off – On – Reset Switch & Power
On Indicator
Light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Base or top wraps first wrap program
Reinforce wrap control for mid-wrapping
Up only or up/down wrap program
Emergency Stop Button
Rotary Arm Jog Button
Film Carriage Lower/Raise Buttons
Film Tension (Force-to-Load) Control
Separate Film Carriage Raise & Lower
Speed Controls
Variable Rotary Arm Speed Control
Rotary Arm and Carriage Elevator Dynamic
Braking
System
Triple Beam Automatic Load Height Detection
Sensor for
dark or shiny loads
Separate 1 to 12 Revolution Top & Bottom
Wrap Control
NEMA 12 Enclosure
Dust tight slip ring assembly
Non-proprietary UL/CSA approved components |
|
| Structural Features: |
Heavy
Duty structural steel construction
Four (4) post free-standing floor
mounted design
Electro-static powder coated paint
finish |
|
| Safety Features: |
Rotary Arm Obstruction Emergency
Safety Stop Sensor |
|
Electrical Requirement:
|
115
Volts 1 Phase 60 Hz 20 Amps |
