1-35
loads per hour
NOTE: Process rates will vary with load size,
number of wraps & forklift load/unload
time
Load Capacity:
Maximum
load weight: 5,000# dynamic – 10,000#
static Maximum load size: 50” W x 50” L
(71” max. load
diagonal) x 80” H (plus up to 2” top
overlap)
Turntable:
48” octagonal
5/16” thick formed steel plate turntable 4 point caster support system Turntable height less than 11” from
floor ANSI # 50 direct chain drive c/w chain
tensioner 3-12 RPM rotational speed c/w soft
start acceleration 1/2 HP DC variable speed motor Final revolution deceleration and
positive stop alignment Front & back forklift ports for
easy movement Accu-Count exact turntable positioning
system for additional
film savings!
Film Carriage Elevator:
1/2
HP DC variable speed motor ANSI #40 direct chain drive c/w shock
dampener &
Anti-Fall
Safety Device Maintenance free 12 point carriage
guidance system
Film Delivery System:
Super
Rapid Thread™ 20” capacity pre-stretch
carriage
with Patent Pending pressure balanced nip
roller system 1/2 HP DC variable speed motor Fully electronic dynamic dancer corner
compensation 33 to 313% fixed stretch capability Pre-stretch ratio variable by easy
sprocket change Rapid Thread™ Safety Door with auto
power cut-off
switch Carriage Descent Obstruction Safety Shut-Off
Device Side mounted film carriage for operator
convenience and
safety
Automation Features:
“All Electric – No
Pneumatics Required”
“Patent
Pending” Cousins exclusive patent
pending A-Arm film
cut and hold device starts and ends the wrap
process at the top
of the load. This uniquely different approach
to attaching and
cutting the stretch film provides you with
these benefits:
Selectable top banding capability Stabilizes the load early in the wrap
cycle Places the ending film tail at the
top of the load instead of the
bottom There is no film clamp on the turntable
that can be
damaged
by debris or operator error – also
eliminates the
need for sliprings
to supply power onto the turntable for
less
maintenance Load placement on the turntable is
not critical No air hook-ups or noisy compressors Automatic First Revolution Load Scanning
Safety
Feature detects uneven or partial stacked
top layers and
automatically adjusts A-Arm height clear
of obstructions A-Arm Anti-Fall Safety Device
Control Features:
PANASONIC
PLC with Touchscreen Operator Interface Power Off – On – Reset
switch & Power
On indicator
light Single button Auto Wrap Cycle Start/Pause Cycle Pause for applying top sheets Reinforce Wrap control for mid-wrapping Emergency Stop button Turntable Jog button Film Carriage Lower & Raise
buttons Film tension (Force-to-Load) control Separate film carriage raise & lower
speed controls Variable turntable speed control Triple
beam auto load height sensing photo-eye,
detects
dark
or shiny loads Separate 1 to 12 revolution top & bottom
wrap control Selectable
Reduced Film Tension parameters for
wrapping
top and/or bottom of load A – B – C
Wrap Program selector with capability to
input
and
store unique wrapping parameters for each
program Pendant
Start/Stop push-button station for remote
operator
control – optional lanyard or wireless
remote
control available NEMA 12 control panel enclosure Non-proprietary UL/CSA approved components 3 wrap modes: automatic spiral wrapping /
automatic top
banding / semi-automatic 3
machines in one!
Structural Features:
All
structural steel construction Forklift truck portable base structure
design – lifting
tubes
included for front and rear access Fully guarded structural steel H-beam
machine tower Electro-static powder coated paint
finish
1-35
loads per hour 
